Description

[vc_row][vc_column][vc_column_text]

Excavator Thumb from Solesbee’s Equipment!

Excavator Thumbs are built to machine specifications to suit the bucket width and number of teeth in order to mesh properly with the bucket’s cutting edge.

All thumbs require a fully filled out spec sheet to be manufactured. This is to ensure a tight fitment on the bucket and also to ensure that the thumb meshes properly with the bucket.

Excavator Hydraulic Pin Mounted Thumb

The most common hydraulic thumb setup that mounts through the main pain of the machine’s stick & bucket (or quick coupler). The main pin replaces the main bucket pin and only requires welding of the hydraulic cylinder base plate to the machine.

• All pins, bushings and cylinder is included with each thumb.
• Hoses are not included
• Built to order to suit any excavator and bucket combination
• Heavy duty design with thick steel plate and welds – built completely in the US

[/vc_column_text][vc_single_image image=”2379″ img_size=”700×525″ alignment=”center”][vc_column_text]

Excavator Hydraulic Stick Mounted Thumb

Stick mounted thumbs have a similar style to the above pin mounted thumbs, however they are completely fixed to the excavator stick. The thumb itself is longer in order to still reach the bucket cutting edge.

• All pins, bushings and cylinder is included with each thumb.
• Hoses are not included
• Built to order to suit any excavator and bucket combination
• Heavy duty design with thick steel plate and welds – built completely in the US

[/vc_column_text][vc_single_image image=”2378″ img_size=”750×525″ alignment=”center”][vc_column_text]

Excavator Hydraulic Progressive Link Thumb

Progressive link thumbs are designed to offer more rotation than a standard hydraulic thumb. By adding another link, a progressive link thumb can rotate a full 180 degrees. Can also be folded up for tighter storage than a standard thumb.

• All pins, bushings and cylinder is included with each thumb.
• Hoses are not included
• Built to order to suit any excavator and bucket combination
• Heavy duty design with thick steel plate and welds – built completely in the US

[/vc_column_text][vc_single_image image=”2377″ img_size=”750×525″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Warranty Information

All Solesbee’s products come with a standard 2 year warranty! For additional information – visit their website here!

Take a look at our whole excavator range here![/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_separator][/vc_column][/vc_row][vc_row][vc_column][vc_toggle title=”Frequently Asked Question’s”]Can I mount this thumb to my specific excavator? 

Yes each thumb is built to suit the OEM pin dimensions of your machine as well as the bucket boss dimensions and tooth spacing.

Can I use the thumb with a quick coupler? 

Yes, hydraulic quick coupler thumbs are longer and pin through the main pin of the coupler to ensure that you can change buckets easily.

Is a rake able to be used in combination with a hydraulic thumb? 

Yes, the rake works well when used with a hydraulic thumb in order to pick up material etc.

Are thumbs in stock ready to be shipped?

Not usually, as each thumb is built to order. Although you can contact us to see if we may have one available to suit your machine.[/vc_toggle][vc_column_text]

If you can’t find the answer to your question, contact us below!

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][contact-form-7 id=”600″][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]